Author(s):
Monika Rohilla*
PG Demonstrator, Department of Pedodontics, PGIDS Rohtak, India
Received: 04 March, 2017; Accepted: 20 March, 2017; Published: 22 March, 2017
Monika Rohilla, PG Demonstrator, Department of Pedodontics, PGIDS Rohtak, India, Tel: 9466187868; E-mail:
Rohilla M (2017) Etiology of Various Dental Developmental Anomalies -Review of Literature. J Dent Probl Solut 4(2): 019-025.10.17352/2394-8418.000042
© 2017 Rohilla M. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Introduction
The development of the tooth involves many complex biological processes, including epithelial- mesenchymal interactions, differentiation, morphogenesis, fibrillogenesis and mineralization. After 37 days of development, a continuous band of thickened epithelium forms around the mouth in presumptive upper and lower jaws from the fusion of separate plates of thickened epithelium–primary epithelial band and gives rise to vestibular lamina and dental lamina [1].
A series of factors influence the normal development of the occlusion, interfering with the correct alignment of teeth and harmonic relationship with the adjacent and antagonistic elements [2]. The most spectacular period of development of the human body takes place in utero and during this period various disturbances may occur, producing changes which are congenital but not always inherited. The explanation for the tendency of the person to inherit certain features or characteristics from his parents is based upon the monumental principle observations of Mendel, who gave two principles on which the transmission of characteristics was based [3].
• Principle of dominance
• Principle of segregation
Developmental disturbances of the teeth may manifest by variations in number, position, size, shape, eruption or structure. Such disturbances may occur in association with some more generalized disorder or may occur independently [4]. General as well as local factors may operate to affect the form and structure of the teeth. It may be that only the form is altered or perhaps only the structure. In other instances both are disturbed. Such influences may begin either before or after birth, so that either deciduous or permanent teeth are involved. The treatment plan for the various congenital and hereditary disturbances depends upon the structural, functional and aesthetic requirements and the influencing factors such as the age of the patient, type of dentition, associated abnormalities etc. must be taken into consideration.
Discussion
The primitive oral cavity or stomodaeum is lined by stratified squamous epithelium called the oral ectoderm. The oral ectoderm contacts the endoderm of the foregut to form the buccopharyngeal membrane. At about the 27th day of gestation this membrane ruptures and the primitive oral cavity establishes a connection with the foregut [5]. The primitive oral band gives rise to two subdivisions, the vestibular lamina and dental lamina. The vestibule forms as a result of proliferation of the vestibular lamina into the ectomesenchyme (Figure 1). Within the dental lamina, continued and localized proliferative activity leads to the formation of a series of epithelial ingrowths into the ectomesenchyme at sites corresponding to the position of future deciduous teeth [5]. The dental lamina serves as the primordium for the ectodermal portion of the deciduous teeth. Later during the development of the jaws, the permanent molars arise directly from a distal extension of the dental lamina [1].
Figure 1:
Because of the complex nature of odontogenesis wherein cells undergo morphodifferentiation and histodifferentiation and where the changes in one group of cells are dependent upon another group of cells, there are many possibilities for disturbances in the development of teeth [5]. Both systemic and local conditions may affect the form and structure of the developing teeth (Table 1). In some instances only the gross appearance of the tooth is affected, the structure remaining normal; in others the structure itself is changed, or both form and structure may be involved [6,7].
Table 1:
Experimental and Clinical Causes of Congenital Development Anomalies
Table 1: Experimental and Clinical Causes of Congenital Development Anomalies.
Genetic factors... Inherited Mutagenetic
Polyfunctional alkalating agents
NH2, ThioTEPA
CB1348, TEM Traizene
Quinine
Pilocarpine
Thallium
Selenium
Nicotine
Sulfonamides
Tetracyclines
Chloroquine
Thalidomide
Salicylates
Malachite green
1. Infections - Rubella
Influenza A
2. Physical
Injuries..... Pressure
Temperature changes
Radiation
3. Hormones ... Diabetes mellitus
Hyperthyroidism
Hypothyroidism
ACTH
Cortisone
Androgenes
Estrogen
4. Nutrition........ Deficiencies of –
Vitamin A
Vitamin B complex
Vitamin D
Vitamin E
Vitamin K
Proteins
Unsaturated fatty
acids
Potassium
Excess of Vitamin A
7. Maternal diseases &
Defects
Uterine tumors
Uterine inflammation
Defects in implantation
Age
Emotional disturbances
Stress
Multiple prgenancies
5. Respiration. Hypoxia
Carbon dioxide
excess
Carbon monoxide
Anesthesia with
ether gas-oxygen
8. Embryonic defects
Abnormalities of the ovum
Abnormalities of semen
Antigen – antibody reactions
6. Miscellaneous drugs and chemicals ...
Antimetabolites
Aminopterin
Amethopterin
Abnormalities of anatomical form and histological structure include multiple teeth, hyperplasia or overdevelopment, and hypoplasia or underdevelopment of the entire tooth and hypoplasia of part of the tooth, the crown or root. Dysplasia of the dental structures includes colour changes, hypo plastic defects which result from deficiencies, traumatic injury, pyogenic or specific infection of the developing teeth. The deciduous teeth which develop in utero and not as frequently affected as are the permanent ones. However, heredity, congenitally transmitted diseases, malnutrition, and diseases affecting the mother during gestation may have their effects on the deciduous teeth [7]. The dental anomalies have been classified according to the stage of development of tooth germ and according to the number, morphology and size and structure (Table 2) [8].
Table 2:
Classification of developmental dental anomalies
A) Anomalies of tooth number
i) Hypodontia
ii) Hyperdontia B) Anomalies of tooth size and morphology
A) Disturbances during initiation of tooth germ
Disturbances during initiation of tooth germ
Hypodontia: Hypodontia is the term used to describe the developmental absence of one or more primary or secondary teeth, excluding the third molars (Figure 2). It is the most common developmental dental anomaly and can be challenging to manage clinically. The term oligodontia is used to define developmental absence of multiple teeth, usually associated with systemic manifestations [9]. Total anodontia denotes complete developmental absence of teeth in both dentitions [10]. The prevalence varies from 2.6% to 11.3% [9]. Hypodontia in the primary dentition is less common with reported prevalence rates varying between 0.5% to 2.4% [11].
Figure 2:
Etiology: The etiology of hypodontia may arise as a familial condition; a high proportion of affected individuals are members of families with a previoushistory of the condition. The nature of the inheritance is complex and not well understood [9]. It has been regarded as a multifactorial condition with genetic and environmental influences playing a role. Hypodontia is also a common presenting feature in a number of systemic conditions, such as ectodermal dysplasia, cleft lip and palate, vander wounde syndrome, down syndrome, incontinentia pigmenti, hyalinosis cutis et mucosae, mandibulo-oculo-facial dyscephaly [8,10,12,13].
Brook suggested that in the majority of cases hypodontia has a polygenetic inheritance pattern and the risk of relatives having hypodontia will depend upon a combination of numerous genetic and environmental factors, each with a small effect [11]. Recent advances in the fields of human genetics and molecular biology are providing us with a greater understanding of tooth development. Those of particular interest in tooth development are the muscle specific homeobox genes Msx1 and Msx2. The proteins encoded by these homeobox genes are known as transcription factors, and can switch other genes on or off, therby controlling gene expression. The Msx1 gene appears to be more important in specification and induction, and Msx2 in further development of the tooth buds [14]. Msx1 gene knocked out had complete failure of tooth development. In humans, genetic linkage analysis of a family with severe hypodontia has demonstrated a mutation in the Msx1 gene, causing selective familial hypodontia [14].
Hyperdontia
Hyperdontia may manifest itself by the production of additional teeth, occurring either in succession as a predeciduous or a postpermanent arrangement or in contemporary arrangement to increase the number of any group of teeth [7] (Figure 3). The prevalence in the permanent dentition is between 0.15 and 1% with predilection of 2:1 for male sex while in the deciduous dentition varies from 0.3% to 0.66% [2].
Figure 3:
Etiology: The aetiology of supernumerary teeth remains unclear, but several theories have been suggested for their occurrence. The phylogenetic process of atavism (evolutionary throwback) has been suggested to explain the development of supernumerary teeth [15]. According to the dichotomy theory, Taylor (1972) stated that the tooth bud splits into two equal or different-sized parts, resulting in two teeth of equal size or one normal and one dysmorphic tooth, respectively.
Sedano and Gorlin (1969) indicated the possibility of an autosomal dominant trait with lack of penetrance in some generations and Bruning, et al., (1957) has even suggested the possibility of sex-linked inheritance to explain the existence of a sex predominance of males over females [16]. Cadenat, et al., (1977) pointed out the presence of a recessive gene on an autosome and a gene on the inhibiting X chromosome. Brook (1984) proposed a combination of genetics and environmental factors to explain the occurrence of supernumerary teeth. Another possibility of the origin is that they are derived from clumps of epithelium that remain after the breaking up of the tooth band and become activated to tooth formation [15,17]. According to Dean, et al., (2001), the differentiation phase of the dental germ, will determine the appearance of a supernumerary tooth [2].
Disturbances during histodifferentiation and morphodifferentiation of tooth germ
Microdontia: Microdontia is used to describe teeth which are smaller than normal i.e. outside the usual limits of variation [18] (Figure 4). The most frequently affected teeth are maxillary lateral incisor and third molars. It has been classified as True generalized microdontia – All the teeth are smaller than normal. Aside from its occurrence in some cases of pituitary dwarfism, this condition is exceedingly rare, Relative generalized microdontia – Normal or slightly smaller than normal teeth are present in jaws that are somewhat larger than normal and there is an illusion of true microdontia [8].
Figure 4:
Etiology: Proportional microdontism is generally associated with dwarfism due to hypofunction of the pituitary gland. Small teeth in normal or large jaws may be due to cross inheritance [6]. Regression or atavism may be the cause of rudimentary development of individual teeth, which take on the cone-shaped or haplodont form of the reptile or fish dentition. This abnormality is frequently inherited and occurs especially in the weakest teeth, the maxillary second incisors [19].
Macrodontia
Macrodontia refers to the teeth that are larger than normal [18] (Figure 5).It has been classified as true generalized macrodontia – this condition in which all the teeth are larger than normal has been associated with pituitary gigantism, but is extremely rare Relative generalized macrodontia – In this normal or slightly larger than normal teeth are present in small jaws, the disparity in size giving the illusion of macrodontia, macrodontia of single teeth – It is relatively uncommon [3,10].
Figure 5:
Etiology: Proportional gigantism is usually caused by hyperpituitarism which increases the length of the long bones and teeth. Disproportional dental gigantism, on the other hand, is suggestive of cross inheritance – large teeth from one parent, small jaws and skeleton from the other6. Hyde (1938) mentioned that size is markedly influenced by heredity and that the inheritance of large teeth is a dominant character. Hrdiicka (1935) stated that size in teeth presents great variations and is a blend of inheritance rather than a single dominant [7].
Dens Invaginatus
Dens invaginatus is an embryologic anomaly that results in invagination of an amelodentinal structure, more or less developed, within the pulp [20] (Figure 6). Incidence ranges from 0.25% to as high as 10% [21,22].
Figure 6:
Oehlers classified dens invaginatus in 3 categories according to the depth of penetration and communication with the periodontal ligament or periapical tissue: Type 1 cases are those in which the invagination ends as a blind sac confined to the crown, In Type 2, the invagination extends apically beyond the external cementoenamel junction, ending as a blind sac and never reaching the periapical tissues. In Type 3, the invagination also extends beyond the cementoenamel junction and a second “apical foramen” is evident in either the periapical tissues or the periodontal ligament [21,22].
Etiology: Several theories have been proposed for this phenomenon, but the etiology of dens invaginatus remains unclear. Kronfeld (1934) proposed that dens invaginatus is caused by a focal failure of growth of the internal enamel epithelium leading to proliferation of the surrounding normal epithelium with eventual engulfment of the static area [23]. Hulsmann (1997) suggested that a part of inner enamel epithelium proliferates faster than adjacent parts and invades the dental papilla [24]. Oehlers (1957) proposed that distortion of the enamel organ occurs during tooth development and results in protrusion of a part of the enamel organ. Other theories include infection (Fischer, 1936) trauma (Gustafson, 1950) and genetics (Hosey, 1996) as possible contributing factors [23]. Radicular invagination was described by Swanson proliferation of epithelial cells causing an apical ingrowth into the dental papilla, Hunter (1950) suggested that it should be classified as dilated odontome [7].
Dens evaginatus
Dens evaginatus is a rare dental anomaly involving an extra cusp or tubercle that protrudes from the occlusal surface of the affected tooth [25], (Figure 7). Also called as Occlusal Tuberculated Premolar, Leong’s Premolar, Evaginated Odontome and Occlusal Enamel Pearl. Prevalence of Dens Evaginatus is between 1% and 4% [26].
Figure 7:
Etiology: It is the result of an abnormal proliferation of the inner enamel epithelium into the stellate reticulum of the enamel organ [25]. Lau (1955) described it as an odontoma of the axial core type. The family involvement and the association of the talon cusp with other dental abnormalities suggest that genetics may be a major causative factor [27]. However, sporadic occurrences of this abnormality probably are induced by trauma or other localized insults affecting the tooth germ.
Talon cusp
As early as 1892, Mitchell reported a maxillary central incisor with a horn-like protuberance projecting from the lingual surface [28]. In canines and incisors, it originates usually in the palatal cingulum as a tubercle projecting from the palatal surface; however, the anomaly also has affected the labial surface of the tooth. Mellor and Ripa named the accessory cusp talon cusp because of its resemblance in shape to an eagle’s talon [27], (Figure 8). Its prevalence varies from less than 1% to approximately 8% [29].
Figure 8:
Hattab, et al., classified this developmental anomaly into three types on the basis of cusp formation and extension ; Talon – A morphologically well – delineated additional cusp that prominently projects from the palatal surface of a primary and permanent anterior tooth and extends at least half the distance from the millim enamel junction to the incisal edge, Semi talon – An additional cusp of a millimeter or more extending less than half the distance from the cementoenamel junction to the incisal edge, Trace talon – Enlarged or prominent cingula and their variations, i.e. conical, bifid, or tuberclelike [16,29].
Etiology: It is suggested that this condition has a multifactorial etiology including both genetic and environmental factors (S M Garn, 1965) [29]. As with other dental abnormalities, talon cusp occurs during the morphodifferentiation stage or odontogenesis, Sicher and Bhaskar (1972) suggest that disturbance during morphodifferentation (such as altered endocrine function) might affect the shape and size of a tooth without impairing the function of the ameloblasts or odontoblasts. Another theory by Hattab, et al. [30], suggests that talon cusp might occur as a result of an outward folding of the inner enamel epithellal cells (preceursors of ameloblasts) and a transient focal hyperplasia or the mesenchymal dental papilla (precursors of odontoblasts) [31]. Genetics may be a major causative factor. This abnormality may also be induced by trauma or other localized insults affecting the tooth germ. Aberrant hyperactivity of the dental lamina may also, be responsible for its occurrence [29].
Taurodontism
Sir Arthur Keith introduced the term in 1913 to describe the “bull-like” condition in teeth (from Latin tauro; “bull” and don’t: “tooth” from Greek”), although Gorjanovic-Kramberger, in 1908, was the first to describe this type of tooth 8, [32]. Taurodontism is a dental anomaly characterized by the enlargement of the pulp chamber, which may reach the proximity of the root apex (Figure 9). Most reports indicate a prevalence of 2.5 to 3.2% of the population and as high as 11% in the Middle Eastern population [19].
Figure 9:
Etiology: The condition is thought to arise from a delay in transformation of the enamel organ into several sheets of Hertwig, a process which normally starts soon after completion of the crown. The etiology of taurodontism is heterogeneous. The trait appears to be due to by an autosomal dominant gene with variable expressivity. Jaspers and Witkop (1980, Jaspers (1981) and Townset (1990) suggested the association of taurodontism with X, chromosome aneuploidy [32]. A variety of possible causes of taurodontism have been enumerated by Mangion as follows : a specialized or retrograde character, a primitive pattern, a mendelian recessive trait, an atavistic feature, a mutation resulting from odontoblastic deficiency during dentinogensis of the roots.
Fusion
In 1963 Tannenbaum and Alling defined fusion as a union of two separate tooth buds at some stage in their development (Figure 10) Depending on the stage they are united, one tooth may have only one pulp chamber as a gemination, or there may be two pulp chambers, with union only of the dentin [33]. Fusion of teeth is relatively frequent, ranging from 0.5 percent to 2.5 percent [34].
Figure 10:
Etiology: Fusion arises through the union of two normally separated tooth germs (Duncum 1987) [35]. Greth (1936) suggested that fused teeth are produced by some physical action, perhaps special pressure forcing young tooth germs into contact, causing necrosis of the intervening tissue and giving the enamel organ and the dental papilla an opportunity to unite. If this occurs very early, the crowns may fuse. At a later stage fusion would affect the roots only because the crowns have been separately developed [7]. If the contact occurs early, that is before calcification begins, the two teeth may be completely united to form a single large tooth. If the contact of teeth occurs later, when a portion of the tooth crown has completed its formation, there may be union of the roots only.
Gemination
In 1963 Tannenbaum and Alling, defined gemination as the formation of the equivalent of two teeth from the same follicle, with evidence of an attempt for the teeth to be completely separate, indicated clinically by a groove or depression which could delineate two teeth (Figure 11) The prevalence of geminated teeth ranges from 0.5% - 2.5%34.
Figure 11:
Etiology: Geminated teeth are produced by abnormal odontogeny. Colyer (1926) was the first to show an irregular epithelial invagination in the enamel organ which seemed to be an attempt to divide it and form two teeth. The result is a bifid crown with confluent roots and root canals. Sprawson (1937) showed how symmetrical division will produce a tooth with bifid normal – appearing crowns, while asymmetrical invagination will produce a component not resembling a normal tooth (accessory tooth) Gemination is the result of either schizodontism, the splitting of a tooth germ during development or synodontism, the fusion of a normal tooth bud with one from a developing supernumerary tooth [8].
Concrescence
Concrescence is a form of fusion in which the union is only in the cementum of adjacent teeth and occurs after the root formation has been completed [3,6]. Concrescence is more frequently noted in maxillary molars (Figure 12). It can occur between normal molars, a normal molar and a supernumerary molar, and in both erupted and impacted teeth [8, 35].
Figure 12:
Etiology: Although the exact etiology is unknown, it is thought to result from trauma or from crowding of the adjacent teeth such that the interdental bone resorbs allowing the adjacent tooth roots to become fused by the deposition of cementum between them [3,6,19]. It has also been postulated to result from an inflammatory response, for example, to a carious lesion, which causes cemental deposition and ultimately attachment to the root of the adjacent tooth [36]. Concrescence originates much later than gemination or fusion. It occurs at a time when the roots are established [7].
Dilaceration
Dilaceration is defined as an angular position between the two parts of a tooth [19,37] (Figure 13). This is due to an abnormality in the formation of the tooth whereby the calcified part is displaced in relation to the uncalcified part [37]. When a deciduous tooth is driven apically into the jaw, a displacement of or injury to the germ of the permanent successor may occur; either an angle between the crown and the root or a disturbance in the formation of the hard dental tissues may result.
Figure 13:
>Etiology: The germs of the permanent incisors are initially situated lingual to the apices of the deciduous teeth. During their further development, the germs gradually get nearer to the resorbing roots of the deciduous teeth. If the already calcified part of the germ is displaced, in relation to the unclarified part, by trauma, the result may be dilacerations or circular hypoplasia [38]. According to Meyer, displacement of the deciduous tooth produces a bone wound which is followed by scar formation, resulting in root curvature. The developing root pushes the calcified part against the scar, thus forcing it into an abnormal direction. It has been emphasized by Van Gool (1973) that dilaceration often follows traumatic injury to the deciduous predecessor, in which the tooth is driven apically into the jaw3 [37].
Conclusion
A series of factors can influence the normal development of the occlusion, interfering in correct alignment of the teeth and harmonic relationship with the adjacent and antagonistic elements. In order to evaluate discrepancies in dentition, it is necessary to be familiar with the normal development of the teeth and the stages involved in it. Early detection and diagnosis of dental anomalies are essential steps in evaluation of the child patient and in treatment planning. In presence of dental anomalies, the dentist should evaluate the moment that they begin to interfere in the normal developmental pattern of occlusion. Then intervention should occur as soon as possible to avoid malocclusion.
Follow us on Academia.edu
Visitors
Peertechz is an international Open Access, peer-reviewed podium which aims to provide scientists, researchers, academicians...
Submit Manuscript